Exitex End Finishing Profile – Gable & Verge Bar Conversion (B) | White, Brown & Anthracite
roofingpolycarbonate.co.uk
£20.26
Exitex End Finishing Profile – Converts Snap Down Bar to Gable/Verge Bar
A tough PVC-u trim that converts a standard Exitex Snap Down glazing bar into an end or gable bar. Simply remove the gasket from the open side of the aluminium base bar and replace it with the End Finishing Profile for a clean, weathertight verge finish.
- Adjustable top compresses to the correct depth when the uPVC top capping is pushed down onto the polycarbonate sheet
- Available in 2500mm (White only), 3000mm and 4000mm (White, Brown & Anthracite Grey)
- Lengths can be joined for runs exceeding 4000mm — seal the joint with neutral cure silicone sealant
- Glazing bar not included — must be purchased separately
Related Exitex Products
- Exitex Capex Snap Down Glazing Bar 10–25mm (B)
- Exitex Glazing Bar Extra Endcap (E)
- Exitex 2100mm PVC End Closure / Drip Trim (F)
- Exitex Wall Flashing to Glazing Bar Bridging Unit (D)
- Exitex Lean to Wall Flashing Profile (C)
