Sunwood Aluminium F Section
Fitted on its own
A simple yet effective method of finishing the gable ends of a lean to roof, can be used either Face fixed to the outer edge of the end rafter or inverted on gable ends where the roof abuts a wall to ease the wall flashing process. Sheets should be sealed within the 'prongs' with a low modulus neutral cure silicone sealant.
Available for 10mm, 16mm & 25mm multi-wall sheets.
Fitted into a Sunwood T60 Glazing Bar
The F section can also be fitted into one side of the T60 glazing bar to finish the edge rafters off as shown below.